What does nP mean?
No 240V power detected at heating element circuit.
Common causes
- One leg of 240V supply missing
- Breaker partially tripped
- Loose connection at terminal block
- Burned wire at outlet
Diagnostic & testing steps
- 1. Check breaker - turn fully off then on
- 2. Measure voltage at dryer outlet - should be 240VAC
- 3. Check terminal block connections at dryer
- 4. Check for burned wires at outlet or plug
OEM parts & part numbers
Power Cord, Terminal Block
Safety warning
⚠️ 240VAC can cause serious injury
Try DiagBuddy AI free — instant 30-second diagnostics for technicians.