What does F01 mean?
Oven door lock mechanism has failed to latch or unlatch during self-clean.
Common causes
- Failed door latch motor
- Broken latch mechanism
- Wiring issue to latch assembly
- Control board latch relay failure
Diagnostic & testing steps
- 1. Wait for oven to cool completely below 550°F
- 2. Cycle power at breaker for 1 minute
- 3. Test door latch motor with multimeter
- 4. Check wiring to latch assembly
- 5. Manually release latch through service access if stuck
- 6. Replace door latch assembly if motor has failed
Tools required
- Multimeter
- Phillips screwdriver
- Torx screwdriver
OEM parts & part numbers
Door Latch Assembly
Part numbers: PB010164, 008056-000
Safety warning
⚠️ Never force oven door open when locked. Wait for oven to cool completely.
Try DiagBuddy AI free — instant 30-second diagnostics for technicians.