Whirlpool washer Error Code F7 E1

What does F7 E1 mean?

Motor speed not detected or motor not reaching target speed.

Common causes

• Failed motor
• Motor control unit failure
• Loose motor connector
• Overloaded tub
• Worn motor brushes

Diagnostic & testing steps

1. 1. Check for overloaded tub - remove excess items
2. 2. Check motor connector is fully seated
3. 3. Test motor windings with multimeter
4. 4. Check MCU for error indicators
5. 5. Replace motor if windings are open

Tools required

• Multimeter
• Socket set

OEM parts & part numbers

Drive Motor, Motor Control Unit

Part numbers: W10677715, W10756692

Safety warning

⚠️ Disconnect power before testing motor