Whirlpool Appliance Error Codes

Complete list of Whirlpool appliance error codes with causes, fixes, and OEM part numbers. 61 codes documented.

• F0 E1 — EEPROM Communication Error
• F0 E2 — Key Stuck in User Interface
• F1 E1 — Main Control Board Failure
• F1 E2 — Motor Control Board Error
• F2 E1 — User Interface Board Communication Error
• F2 E3 — User Interface Mismatch
• F3 E1 — Water Level Pressure Switch Error
• F3 E2 — Water Temperature Sensor Error
• F5 E1 — Door Switch Error
• F5 E2 — Door Lock Fault
• F5 E3 — Door Unlock Failure
• F6 E2 — Communication Error Between Main and UI
• F7 E1 — Motor Speed Sensing Error
• F8 E1 — Low Water Flow
• F8 E2 — Dispenser Motor Error
• F8 E3 — Overflow/Flood Condition
• F9 E1 — Long Drain
• F9 E2 — Drain System Problem
• F1 — Main Control Board Failure
• F2 — Keypad/User Interface Error
• F22 — Exhaust Thermistor Open/Shorted
• F23 — Exhaust Thermistor Failure
• F24 — Inlet Thermistor Error
• F25 — Inlet Thermistor Shorted
• F26 — Drive Motor Error
• F28 — Moisture Sensor Error
• F29 — Gas Valve Circuit Failure
• F30 — Restricted Airflow
• F31 — MCU Communication Error
• CF — Communication Failure
• PO — Power Outage Detected
• SY CE — System Communication Error
• SY EF — Evaporator Fan Circuit Failure
• F1 — Temperature Sensor Error
• F2 — Water Leak Detected
• F5 — Door Switch Error
• F6 — Water Inlet Valve Error
• F7 — Flow Meter Error
• F8 — Drain Pump Error
• F9 — Diverter Error
• F1 E0 — EEPROM Communication Error
• F2 E0 — Oven Temperature Too High
• F3 E0 — Oven Temperature Sensor Open
• F3 E2 — Oven Temperature Sensor Short
• F5 E0 — Door Latch Error
• F9 E0 — Oven Door Lock Failure
• E0 F0 — No Faults Detected (Diagnostic Mode)
• E0 F1 — Compressor Inverter Failure
• E1 F1 — Freezer Thermistor Open
• E1 F2 — Refrigerator Thermistor Open
• E2 F1 — Defrost Thermistor Failure
• E5 F1 — Freezer Fan Circuit Failure
• E6 F2 — Damper Control Failure
• E9 F1 — Ice Maker Optics Failure
• F2 E1 — Stuck Key
• F3 E1 — Thermistor / OWI Failure
• F6 E2 — Wash Pump Motor Failure
• F7 E1 — Heating Element Failure
• F8 E4 — Diverter Disk Position Error
• F9 E1 — Drain Pump Electrical Failure
• F0 E4 — Water Inlet Valve Defective

Try DiagBuddy AI free — instant 30-second diagnostics for technicians.